RotoPrecision Inc. - Anderton Specialty Fasteners Retaining Rings and Circlips

• Index - Retaining Rings
• Anderton Rings
• Nomenclature
• Interchange
• Smalley® Rings

• Internal
• External
• Internal Plain Wire
• External Plain Wire
• E-Type and Variants
• Self-Locking (No Groove)
• Shims & Support Washers
• Tools

• Engineering Information

• Anderton (Cirteq) Website

External circlips or snap rings produced by coiling or forming an even sectioned wire. Their performance is generally inferior to the tapered section 1400 types due to the uneven stresses within the rings. When fitted, snap rings cannot contact the groove fully because of these uneven stresses.

Nominal Size: Most of these ring types take their size designation from the shaft size.

Example:
• Metric: M2400-0300 (30mm shaft)

Product Range (Click a row for detailed specifications)

Product Range
	0500 Series: Axially Applied Rectangular section applied axially typically used where space is limited or where the lugs of the 1400 types are unacceptable. Difficult to remove. Limited range. A0500 (Inch)
	0600 Series: Radially Applied Square section applied radially. Low clearance. Limited range. A0600 (Inch)
	0700 Series: Axially Applied Square section applied radially. Low clearance, difficult to remove. Limited range A0700 (Inch)
	0900/1000 Series: Axially Applied Round section applied axially. Difficult to remove. Limited range. Note: The main difference in 0900 versus 1000 type is that the 1000 is supplied standard in a galvanized wire as compared with the normal oil-dipped finish. A0900/A1000 (Inch)
	1100 Series: Radially Applied Designed to tolerate wide groove diameter variations and provides a high should for increased abutment Radially applied. Easily fitted and removed. A1100 (Inch)
	1200 Series: Radially Applied Similar to the 1100 series but with more peripheral abutment. Radially applied. Easily fitted and removed. A1200 (Inch)
	2400 Series: Axially Applied Designed specifically for use with roller bearings. Low clearance, difficult to remove. Large range. M2400 (Metric)
	3200 Series: Axially Applied Designed specifically for use with roller bearings. Radiused edged material section permits assembly into badly cut bearing grooves. Large range. M3200 (Metric)

For any additional information or for immediate assistance,
please contact Application Support.

• Last Page Viewed
• Home Page
• Contact Us